Kubota M5-091, Operator'S Manual

Page: 136 / 176

PERIODIC SERVICE 112
C Replacement procedure
[Non bolt fixed slow-blow fuse:]
1. Disconnect the negative cord of the battery.
2. Pull out the fuse from the fuse box.
3. Replace with a new one of the same capacity.
[Bolt fixed slow-blow fuse:]
Consult your local KUBOTA Dealer for this service.
B Replacing Light Bulb
B
Replacing Head Lamp
To avoid personal injury:
A
Be careful not to drop the bulb, hit anything
against the lamp, apply excess force, and get
the lamp scratched. If broken, glass may cause
injury. Pay more attention to halogen lamps in
particular, which have high pressure inside.
A Before replacing the lamp, be sure to turn off
the light and wait until the bulb cools down,
otherwise, you may get burned.
1. While pushing the right and left lock buttons, pull and
remove the electrical connector.
2. Turn the cover counterclockwise to remove it.
3. Turn the bulb base counterclockwise to take out the
bulb.
4. Replace with a new bulb and reinstall the head lamp
assembly in the reverse order.
A Be sure to use a new bulb of the specified wattage.
A
Never touch the bulb surface (glass) with bare hands.
Fingerprints, for example, may break the bulb.
(1) Fuse box
(2) Bolt
(3) Bolt fixed slow-blow fuse
(4) Non bolt fixed slow-blow fuse
Light Capacity
Head light 12 V, 55 / 60 W (H4)
Hazard light 12 V, 23 W
Turn signal 12 V, 21 W
Tail light 12 V, 5 W
Work light (if equipped) 12 V, 35 W
Front work light 12 V, 35 W
(1) Electrical connector
(2) Lock buttons
(3) Cover
(4) Bulb base
(5) Bulb (A)"Base's wider projection to face
upward"