Kubota M5-091, Operator'S Manual

Page: 171 / 176

TIRES, WHEELS AND BALLAST 12
B
Adjusting Fender Height
Adjust the height of the fender according to the size of the
tire.
C Adjusting procedure
1. Remove the rear wheels.
2. Remove the cover and disconnect the rear
combination lamp connector.
3. Remove the right-hand fender mounting bolts (A), (B),
(D) and nuts (C), (E) and detach the right-hand fender.
4. Remove the left-hand fender mounting bolts (A), (B)
and nuts (C) and detach the left-hand fender.
5. When adjusting the fender height from "Lower
position" to "Upper position", remove Cover 1 and
interchange Cover 2 and Cover 3.
When adjusting the fender height from "Upper
position" to "Lower position", interchange Cover 3 and
Cover 2 and reinstall Cover 1.
6. Change the position of the fender (right and left) to the
desired position, and tighten the bolts (A), (B), (D) and
nuts (C), (E).
[Tightening torque]
7. Reinstall the rear wheel.
(See "WHEEL ADJUSTMENT" in "TIRES, WHEELS
AND BALLAST" section.)
(1) Cover
(2) Connector
(3) Nut, Lock washer (A) "UPPER POSITION"
(1) Cover 1
(2) Cover 2
(3) Cover 3
M10 bolt: 48.1 to 55.9 N-m, 4.9 to 5.7 kgf-m,
35.5 to 41.2 ft-lbs
M8 bolt: 23.5 to 27.5 N-m, 2.4 to 2.8 kgf-m,
17.3 to 20.3 ft-lbs
M6 bolt: 9.8 to 11.8 N-m, 1.0 to 1.2 kgf-m,
7.2 to 8.7 ft-lbs
M8 nut: 23.5 to 27.5 N-m, 2.4 to 2.8 kgf-m,
17.3 to 20.3 ft-lbs