Kubota L3301, Operator'S Manual

Page: 107 / 139

(1) Clutch pedal
(2) Shuttle shift lever (3) PTO gear shift lever
Test of switch for the synchro-shuttle shift lever
1. Sit on the operator's seat.
2. Shift the shuttle-shift-lever to the
“FORWARD” or
“REVERSE” position.
3. Depress the clutch pedal fully.
4. Disengage the PTO-gear-shift-lever.
5. Turn the starter key to the
“START” position.
6. Make sure that the engine does not crank.
7. If the engine cranks, consult your local KUBOTA
dealer for servicing the synchro-shuttle shift lever.
Test of switch for the PTO gear shift lever
1. Sit on the operator's seat.
2. Engage the PTO-gear-shift-lever.
3. Depress the clutch pedal fully.
4. Shift the shuttle-shift-lever to the neutral position.
5. Turn the starter key to the
“START” position.
6. Make sure that the engine does not crank.
7. If the engine cranks, consult your local KUBOTA
dealer for servicing the PTO-gear-shift-lever.
4. Checking the engine start system
[HST type]
WARNING
To avoid personal injury or death:
• Do not allow anyone near the tractor while
testing.
• If the tractor does not pass the test, do not
operate the tractor.
Preparation before testing
1. Place all the control levers in the “NEUTRAL”
position.
2. Set the parking brake and stop the engine.
(1) Speed control pedal
(2) Clutch pedal (2) PTO gear shift lever
Test of switch for the speed control pedal
1. Sit on the operator's seat.
2. Depress the speed-control-pedal to the desired
direction.
3. Depress the clutch pedal fully.
4. Disengage the PTO-gear-shift-lever.
5. Turn the starter key to the
“START” position.
6. Make sure that the engine does not crank.
7. If the engine cranks, consult your local KUBOTA
dealer for servicing the speed-control-pedal.
Test of switch for the PTO gear shift lever
1. Sit on the operator's seat.
2. Engage the PTO-gear-shift-lever.
3. Depress the clutch pedal fully.
4. Place the speed-control-pedal in the neutral
position.
5. Turn the starter key to the “START” position.
6. Make sure that the engine does not crank.
7. If the engine cranks, consult your local KUBOTA
dealer for servicing the PTO-clutch-control-switch
and lever.
5. Checking the operator presence
control
Check if the engine shuts off when you stand up from
the operators seat.
WARNING
To avoid personal injury or death:
• Do not allow anyone near the tractor while
testing.
• If the tractor does not pass the test, do not
operate the tractor.
Preparing for the checking
1. Place all control levers in the “NEUTRAL” position.
2. Set the parking brake and stop the engine.
SERVICE EVERY 50 HOURS PERIODIC SERVICE
L3301,L3901
103