Kubota L3301, Operator'S Manual

Page: 86 / 139

TIRES, WHEELS, AND BALLAST
TIRES
WARNING
To avoid personal injury or death:
• Do not attempt to mount a tire on a rim. Only a
qualified person with the proper equipment
should mount a tire on a rim.
• Always maintain the correct tire pressure.
Do not inflate the tires above the recommended
pressure shown in the Inflation pressure
section.
(See Inflation pressure of tires on page 82)
IMPORTANT :
• Do not use tires other than those approved by
KUBOTA.
1. Inflation pressure of tires
Though the tire pressure is factory-set to the prescribed
level, it naturally drops slowly in the course of time.
Thus, check the tire pressure everyday and inflate as
necessary.
Tire sizes Inflation Pressure
Rear
11.2-24, 4PR
100 kPa
(1.0 kgf/cm
2
)
[14 psi]
13.6-16, 4PR
100 kPa
(1.0 kgf/cm
2
)
[14 psi]
15-19.5, 6PR
210 kPa
(2.1 kgf/cm
2
)
[30 psi]
Front
5.00-15, 4PR
220 kPa
(2.2 kgf/cm
2
)
[32 psi]
7.2-16, 8PR
180 kPa
(1.8 kgf/cm
2
)
[26 psi]
23 x 8.50-12, 4PR
160 kPa
(1.6 kgf/cm
2
)
[23 psi]
25 x 8.50-14, 6PR
160 kPa
(1.6 kgf/cm
2
)
[23 psi]
27 x 8.50-15, 6PR
210 kPa
(2.1 kgf/cm
2
)
[30 psi]
NOTE :
• Maintain the maximum pressure in front tires, if
using a front loader or when equipped with a
full load of front weight.
2. Dual tires
You can not use the dual tires.
Dual tires are not approved.
WHEEL ADJUSTMENT
WARNING
To avoid personal injury or death:
• When working on slopes or when working with
a trailer, set the wheel tread as wide as practical
for maximum stability.
• Support the tractor securely on stands before
removing a wheel.
• Do not work under any hydraulically supported
devices. They can settle, suddenly leak, or be
accidentally lowered. If necessary to work
under the tractor or any machine elements for
servicing or adjustments, securely support
them with stands or suitable blocking
beforehand.
• Never operate the tractor with a loose rim,
wheel, or axle.
1. Front wheels
WARNING
To avoid personal injury or death:
• Before jacking up the tractor, park it on a firm
and level ground and chock the rear wheels.
• Fix the front axle to keep it from pivoting.
• Select the jacks that withstand the machine
weight and set them up as shown in the
following figure.
TIRES, WHEELS, AND BALLAST TIRES
82
L3301,L3901