Kubota L3301, Operator'S Manual

Page: 114 / 139

6. If the distance between the tire beads at front of tire
is not shorter than the distance between the tire
beads at rear of tire, adjust the length of tie rod.
(See Adjusting the toe-in on page 110)
(A) Wheel-to-wheel distance at
rear
(B) Wheel-to-wheel distance at
front
(C) Front
Proper toe-in
2 mm to 8 mm
(0.08 in. to 0.31 in.)
2.1 Adjusting the toe-in
1. Loosen the lock nuts.
2. Turn the turnbuckle to adjust the length of tie rod
until the proper toe-in measurement is obtained.
3. Retighten the lock nuts.
(1) Lock nuts
(2) Turnbuckle
(3) Tie rod [A] 2WD
[B] 4WD
SERVICE EVERY 400 HOURS
1. Changing the engine oil
WARNING
To avoid personal injury or death:
• Be sure to stop the engine and remove the
starter key before changing the engine oil.
• Allow the engine to cool down sufficiently
because the engine oil can be hot and can burn.
1. To drain the used engine oil, remove the drain plug
at the bottom of the engine and drain the engine oil
completely into the oil pan.
2. After draining the engine oil, reinstall the drain plug.
PERIODIC SERVICE SERVICE EVERY 200 HOURS
110
L3301,L3901