2.4 Adjusting the check chains
1. Adjust the turnbuckle to control the horizontal sway
of the implement.
(See Hydraulic control unit use reference chart on
page 81)
2. After adjustment, re-set the lock nut.
(1) Turnbuckle
(2) Lock nut
2.5 Dealing with the lower link holder
1. Holds the lower links with the lower-link-holder.
When operating the tractor without an implement, it
is necessary to lock the lower links to prevent them
from hitting the rear wheels of the tractor.
DRAWBAR
WARNING
To avoid personal injury or death:
• Never pull from the top link, the rear axle, or any
point above the drawbar. Pulling from the top
link, the rear axle, or any point above the
drawbar could cause the tractor to tip over
rearward.
1. Adjusting the drawbar length
1. Adjust the length of the drawbar.
When towing an implement, it is recommended that
the (B) hole in drawbar to be utilized.
For information about the drawbar load, read the
IMPLEMENT LIMITATION TABLES on page 26.
(1) PTO shaft
(2) Drawbar
(3) Pivot pin
(A) Hole-A
(B) Hole-B
3-POINT HITCH AND DRAWBAR
3-POINT HITCH
78
L3301,L3901
Summary of Contents for L3301
