Kubota B1710, Workshop Manual

Page: 49 / 370

G-34
B1710 · B2110 · B2410 · B2710, WSM G GENERAL
Injection Pump Pressure Tester
Application: Use to check fuel tightness of injection pumps.
W10252400
Flywheel Stopper
Application: Use to loosen and tighten the flywheel screw.
W10259480
A
Pressure gauge full scale : More than 29.4 MPa (300 kgf/cm
2
, 4267
psi)
B Copper gasket
C Flange (Material : Steel)
D Hex. nut 27 mm (1.06 in.) across the plat
E Injection pipe
F PF 1/2
G 5 mm (0.20 in.)
H 17 mm dia. (0.67 in. dia.)
I 8 mm dia. (0.31 in. dia.)
J 1.0 mm (0.039 in.)
K 17 mm dia. (0.67 in. dia.)
L 6.10 to 6.20 mm dia. (0.2402 to 0.2441 in. dia.)
M 8 mm (0.31 in.)
N 4 mm (0.16 in.)
O 11.97 to 11.99 mm dia. (0.4713 to 0.4721 in. dia.)
P PF 1/2
Q 23 mm (0.91 in.)
R 17 mm (0.67 in.)
S 4 mm (0.16 in.)
T 12.00 to 12.02 mm dia. (0.4724 to 0.4732 in. dia.)
U 100 mm (3.94 in.)
V M12 × P1.5
a Adhesive application
b Fillet welding on the enter circumference
A 200 mm (7.87 in.)
B 30 mm (1.18 in.)
C 20 mm (0.79 in.)
D 15 mm (0.59 in.)
E 15 mm (0.59 in.)
F 8 mm (0.31 in.)
G 10 mm dia. (0.39 in. dia.)
KiSC issued 11, 2006 A