Kubota B1710, Workshop Manual

Page: 246 / 370

6-S6
B1710 · B2110 · B2410 · B2710, WSM FRONT AXLE
Bi-speed Turn Shift Rod (Bi-speed Turn Model)
1. Set the front wheel drive lever to the 4WD position and bi-speed
turn lever to the ON position.
2. Hoist the front of the tractor to a position where you can turn the
front wheels with your hands.
3. Turn the steering wheel and set the steering angle of the inside
tire to as below.
B2110, B2410 : 0.42 rad. (24 °)
B2710 : 0.45 rad. (26 °)
At this time, make sure both the left and right tires turn
simultaneously in the same direction.
4. If both tires do not turn in the same direction, adjust length A of
the bi-speed turn shift rod while being careful not to change the
steering angle.
(Set the neutral position when 4WD and bi-speed changes at
0.42 rad. (24 °).for B2110, B2410 or 0.45 rad. (26 °) for B2710.)
5. Make sure that when the wheels are steered to more than 0.45
rad. (26 °) for B2110, B2410 or 0.49 rad. (28 °) for B2710, the bi-
speed turn starts to work.
(Reference)
• Length A of the bi-speed turn shift rod
B2110, B2410 : 84 mm (3.31 in.)
B2710 : 88 mm (3.46 in.)
NOTE
■
• When you adjust the bi-speed turn shift rod, be sure the
angle of the shift rod end is the same as the angle in the
figure left.
W10128860
Steering inner angle (2)
(When bi-speed turn
neutral)
Factory
spec.
B2110
B2410 0.40 to 0.45 rad.
23 ° to 26 °
B2710
0.45 to 0.49 rad.
26 ° to 28 °
(1) Bi-speed Turn Shift Rod
(2) Steering Inner Angle (3) 0.90 rad. (52 °)
KiSC issued 11, 2006 A