Kubota 50740, Operating Instructions Manual

Page: 77 / 194

Operation
RG268-8135-6
75
01/2019
Adjusting the operator's seat
Horizontal seat adjustment (seat stand-off)

Pull the horizontal seat adjustment lever (5) up and move the
seat to the desired position by moving it forward or back, then
release the lever.
Spring adjustment (operator's weight)

The seat can be set to the weight of the operator using the toggle (figure above, position/4). Refer to the
weight indicator (figure above, position/3) when choosing your setting.

Turning the grip clockwise increases spring tension (heavier operator), turning the grip anticlockwise reduces
spring tension (lighter operator).

Adjust the seat so that a comfortable cushioning is achieved.
Seat height adjustment (knee height)

To adjust the seat height, turn the rotary knob (figure above, position/2). The seat height depends on the set-
ting of the level (0, I, II, III), where level 0 is the lowest option. Adjust the seat height in relation to its horizontal
position so that the foot controls can be operated safely.
Backrest adjustment

Take the load off the backrest and pull up the backrest adjustment lever (figure above, position/1). Set the
backrest to the desired sitting position and release the lever. The backrest should be adjusted so that the op-
erator can safely operate the control levers with the back resting completely on the backrest.
Adjust the operator's seat so that fatigue-free and comfortable working is possible. It should be pos-
sible to operate all controls safely.
Check that the seat is locked in place.
1
2 3 4
5
STOP