64
RG268-8135-6
01/2019
Operation
Getting on the excavator
Move the left control console (2) up as far as possible by pulling
the control lever lock (1) up.
Get into the excavator, use the chain as a stepping aid.
Sit down on the operator's seat.
Explanation of the display indications
If the starter switch is switched to the RUN position, the time (3), the
engine speed (4) and the hours of operation (5) can be indicated on
the display (2).
For the selection of the display indication, press the display selector
switch (1) until the desired indicator appears on the display.
Press the display selector switch (1).
On the display, the hours of operation are indicated for about
10 seconds.
Risk of injury when entering or leaving the machine!
When entering or leaving the machine without a secure halt, you can slip and fall down.
- Do not jump onto or off of the excavator
- Always hold the hand rail tightly with one hand
- Pay attention to stepping safely
The control console must remain in this position until
the engine is started, as the engine can only be started
in this position.
The following function can be carried out when the key
is not in the starter switch.
STOP
1
2
2
1
3
4
5
Summary of Contents for 50740
