148
RG268-8135-6
01/2019
Maintenance
Make the battery accessible.
Check the electrolyte level in the battery, adding distilled water if required.
Remove the negative terminal cover and take off the cable clamp. Move the clamp to the side so as to avoid
contact with the negative terminal.
Remove the positive terminal cover.
Connect the battery charger to the battery according to the instructions of the charger manufacturer. Choose
the normal (gentle) charging method.
Clean the battery after charging and replenish the electrolyte, if necessary.
Check the acid density with a hydrometer. The acid density should be between 1.24 and 1.28 kg/l. If the acid
density differs considerably among the individual cells of a battery, the battery probably has a defect. Check
the affected battery with a battery tester and contact trained personnel.
Battery - change
Open the side cover (page 144).
Remove the negative terminal cover and take off the cable
clamp (1). Move the clamp to the side so as to avoid contact
with the negative terminal.
Remove the positive terminal cover and take off the cable
clamp (3). Move the clamp to the side so as to avoid contact
with the positive terminal.
Remove the battery retainer (2) and lift the battery out of the
swivel frame.
Before installation, cover the battery terminals and cable clamps with petroleum jelly.
Install the battery in the swivel frame and fasten it with the battery retainer. Make sure that the battery is in-
stalled tightly
Do not operate the excavator with a loose battery.
Connect the positive cable clamp to the positive terminal (+) of the battery, install the positive terminal cover.
Connect the negative terminal (-) of the battery, install the negative terminal cover.
When disconnecting and connecting the battery, always observe the specified order
Risk of short
circuit.
When disconnecting and connecting the battery, always observe the specified order
Risk of short
circuit.
When replacing the battery, always install a battery of
the same type with the same power rating and the
same dimensions.
STOP
STOP
2
3
1
Summary of Contents for 50740
