KTR-Group KTR-STOP XS F B Series, Operating & Assembly Instructions

Page: 2 / 25

KTR-STOP
®
XS-xx-F B-xx
Operating/Assembly instructions
KTR-N
Sheet:
Edition: 44536 EN
2 of 25
3
Please observe protection
note ISO 16016.
Drawn: 2020-03-26 Shg/Wie Replacing: KTR-N dated 2017-12-19
Verified: 2020-03-26 Shg Replaced by:
The KTR brake system was designed to operate as a service brake/emergency stop brake on rotating
brake disks. For any other applications please consult with KTR.
1 Technical data 3
2 Advice 5
2.1 General advice 5
2.2 Safety and advice symbols 5
2.3 General hazard warnings 6
2.4 Intended use 6
3 Storage 6
3.1 Storage 6
3.2 Transport and packaging 6
4 Assembly 7
4.1 Components of the brake 7
4.2 Preparation of assembly 9
4.3 Brake pads 10
4.4 Assembly of the brake 10
4.5 Setting/resetting of the centering system 12
4.6 Pressure port of a brake 13
4.7 Pressure port of several brakes 14
4.8 Start-up of the brake 15
4.9 Setting/Resetting of the brake 16
4.10 Recommendation of fluids to be used 17
4.11 Disassembly of the brake 18
4.12 Spares inventory, customer service addresses 18
4.13 Disposal 19
5 Maintenance 19
5.1 Replacement of brake pads 19
5.2 Maintenance of the brake / replacement of single parts 20
5.3 Maintenance and service 23
6 Accessories - Sensor 24
6.1
Technical Data „State/wear sensor“
24
6.2 Assembly / start-up 25
Table of contents