KTR-STOP
®
XS-xx-F B-xx
Operating/Assembly instructions
KTR-N
Sheet:
Edition:
44536 EN
9 of 25
3
Please observe protection
note ISO 16016.
Drawn:
2020-03-26 Shg/Wie
Replacing:
KTR-N dated 2017-12-19
Verified:
2020-03-26 Shg
Replaced by:
Component assembly 8: Pad retraction set for housing
Component
Quantity
Description
Illustration 8: Pad retraction set for housing
8.1
1
Pin
8.2
1
Pressure spring
To ensure the full braking power, the preparation for assembly needs to be performed
carefully.
•
The connection plate for the brake as well as the brake disk have to be inspected for dimensional accuracy.
For that purpose please investigate the connection dimensions, connection surfaces and tolerances as
specified in the drawing (see illustrations 1 to 3 and table 3).
•
Clean and degrease the brake disk and mounting surfaces. Dirt can easily be removed by means of solvents.
The connection between connection plate and brake is defined as frictionally engaged. Any
residues of oil, dirt and corrosion protection reduce the coefficient of friction. As a result
the operation of the brake and the full braking power are no longer ensured.
!
Please observe the manufacturer’s instructions regarding the use of solvents.
4
Assembly
4.1 Components of the brake
4.2 Preparation of assembly
