3
SERVICE WORK ON THE CHASSIS
14
B01102-10
–
Switch off all power consumers and switch off the engine.
–
Remove screw
.
–
Remove fastening plate
.
E00299-10
–
Remove the battery from the battery compartment.
–
Disconnect negative cable
from the battery.
–
Pull back positive terminal cover
.
H01143-10
–
Connect the battery charger to the battery. Set the battery charger.
Alternative 1
Battery charger
XCharge-professional
EU (00029095050)
Alternative 2
Battery charger
XCharge-professional
US (00029095051)
Alternative 3
Battery charger
XCharge-professional
GB (00029095052)
Alternative 4
Battery charger
XCharge-professional
CH (00029095053)
Info
Follow the instructions of the charger and the manual.
–
Disconnect the battery charger after charging the battery.
Guideline
The charging current, charging voltage, and charging time must not be exceeded.
Charge the battery regularly when the
motorcycle is not in use
3 months
E00299-10
–
Slide positive terminal cover
over the positive terminal.
–
Position negative cable
and mount and tighten the screw.
Guideline
Screw, battery terminal
M5
2.5 Nm
(1.84 lbf ft)
Battery (YTX5L-BS)
B01102-10
–
Position the battery in the battery compartment.
–
Attach fastening plate
.
–
Mount and tighten screw
.
