KTM Freeride 350 2017 Series, Setup Instructions

Page: 10 / 26

3 SERVICE WORK ON THE CHASSIS
8
3.1 Raising the motorcycle with a lift stand
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
401942-01
–
Raise the motorcycle at the frame underneath the engine.
Lift stand (78929955100)
Neither wheel is in contact with the ground.
–
Secure the motorcycle against falling over.
3.2 Removing the motorcycle from the lift stand
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
401943-10
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, fold side stand

down to the ground with your foot and
rest the motorcycle on it.
Info
While riding, the side stand must be folded up and secured with the rubber
band.
3.3 Installing the shock absorber
E00291-11
Main work
–
Push splash protector  to the side and position the shock absorber. Mount and
tighten screw  .
Guideline
Screw, top shock absorber M12 80 Nm
(59 lbf ft) Loctite ® 2701™
–
Mount and tighten screw

.
Guideline
Screw, bottom shock
absorber M12 80 Nm
(59 lbf ft) Loctite ® 2701™
Info
The heim joint for the shock absorber at the swingarm is Teflon coated. It
must not be greased with grease or with any other lubricants. Lubricants
dissolve the Teflon coating, thereby drastically reducing the service life.
–
Mount and tighten screw

.
Guideline
Screw, upper subframe M10 45 Nm
(33.2 lbf ft) Loctite ® 243™
Finishing work
–
Lock the seat. ( p. 10)
–
Remove the motorcycle from the lift stand. ( p. 8)