ERGONOMICS 8
77
8.11
Setting the shift lever stub
E02244-10
–
Remove screw
1
along with the shift lever stub.
–
Position the shift lever stub with the screw in one of drilled
holes
2
depending on the desired lever length.
Guideline
Standard
Middle hole
–
Tighten the screw.
Guideline
Remaining screws,
chassis
M6
10 Nm (7.4 lbf ft)
8.12
Adjusting the basic position of the foot brake lever
M00828-10
–
Detach spring
1
.
–
Loosen nut
2
.
–
Remove screw
3
.
–
To adjust the basic position of the foot brake lever to individ-
ual requirements, turn ball joint
4
accordingly.
Info
The range of adjustment is limited.
The screw must be screwed into the ball joint by at
least 5 turns.
–
Hold ball joint
4
and tighten nut
2
.
Guideline
Remaining nuts,
chassis
M6
10 Nm (7.4 lbf ft)
–
Mount and tighten screw
3
.
Guideline
Screw, ball joint
of push rod on
foot brake cylin-
der
M6
10 Nm (7.4 lbf ft)
Loctite
®
243™
–
Attach spring
1
.
