13 SERVICE WORK ON THE CHASSIS
96
13.1
Raising the vehicle with the center stand
Note
Material damage
The vehicle may be damaged by incorrect procedure when parking.
Significant damage may be caused if the vehicle rolls away or falls over.
The components for parking the vehicle are designed only for the weight of the vehicle.
–
Park the vehicle on a firm and level surface.
–
Ensure that nobody sits on the vehicle when the vehicle is parked on a stand.
402032-10
–
Stand to the left of the vehicle.
–
Hold the handlebar with your left hand and push the center
stand onto the ground with your right foot.
–
Put your entire weight on arm
1
of the center stand while
pulling the vehicle up at the left grab handle.
The center stand is folded out to the stop.
13.2
Removing the vehicle from the center stand
Note
Danger of damage
The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
402033-10
–
Make sure that the steering is unlocked.
–
Move the vehicle forward with both hands on the handlebar.
–
While the vehicle tips off the center stand, actuate the front
brake to stop the vehicle from rolling away.
–
Check that the center stand
1
is folded all the way up.
13.3
Removing the passenger seat
Condition
The motorcycle is stationary.
The engine is off.
The ignition has been switched on or off for less than 1 minute.
E02246-10
–
Press seat release button
1
.
–
Raise the front of the passenger seat, pull it toward the fuel
tank and take off from above.
