DASH 7
45
7.27.2
Phone
E02207-01
Condition
• The motorcycle is stationary.
•
Bluetooth
®
function is activated.
• The
Bluetooth
®
function should also be activated in the device
to be paired.
–
Press the
SET
button or
RIGHT
button when the menu is closed.
–
Press the
UP
button or
DOWN
button until
KTM MY RIDE
is
marked. Press the
SET
or
RIGHT
button to open the menu.
–
Press the
UP
button or
DOWN
button until
Phone
is marked.
Press the
SET
button to open the menu.
Info
Only one cellphone can be paired with the vehicle.
–
Press the
UP
or
DOWN
button until
Pairing
is marked. Press
the
SET
button to open the submenu.
–
The vehicle starts searching for a suitable cellphone. If the
search was successful, the name of the cellphone is displayed
in the
New Pairing
submenu. Press the
SET
button to start the
pairing.
Info
The cellphone must be visible via
Bluetooth
®
for the
vehicle to find the cellphone.
–
A message appears on the dash indicating that the vehicle is
now ready for pairing. The pairing is completed successfully by
confirming the
Passkey
on the cellphone and on the dash.
Info
Press the
UP
or
DOWN
button until
Delete Pairing
is
marked. The paired device can be deleted by pressing
the
SET
button.
Not every cellphone is suitable for pairing with the vehi-
cle.
–
Move the previously paired device into the range of the vehicle
while the
Bluetooth
®
function is active.
The device is automatically connected with the vehicle.
If the device is not automatically connected with the vehi-
cle after approx. 30 seconds:
–
Switch on the vehicle again or repeat the
New Pair-
ing
procedure.
A suitable cellphone can be paired with the vehicle in the
Phone
submenu.
