KTM F8203U2, Setup Instructions

Page: 11 / 49

SETUP 2
9
402390-01
(All EU/BR/CN models)
–
Mount the turn signal switch.
V01882-01
Condition
Packaging V12
(All EU/BR/CN models, EXC-F US)
–
Join all plug-in connectors to the connector board.
–
Route the cables without tension and secure with the
cable ties.
V01883-10
(XCF
‑
W)
–
Plug in light pull switch
4
with the yellow and white
cables.
–
Join all plug-in connectors to the connector board.
–
Route the cables without tension and secure with the
cable ties.
S01411-01
(EXC
‑
F WESS EU, All Six Days models, XCF
‑
W)
Warning
Voiding of the government approval for road use and
the insurance coverage
If the combination switch
is mounted, the vehicle’s road permit, if any,
expires.
–
Only operate the vehicle in closed-off areas
remote from public road traffic if the combina-
tion switch is installed.
–
(Optional) Remove the protection cap and join the plug-in
connector of the left combination switch.