KTM F8203U2, Setup Instructions

Page: 44 / 49

4 TECHNICAL DATA
42
4.1 Chassis tightening torques
Remaining screws, chassis EJOT PT ® K60x25
‑
Z 2 Nm (1.5 lbf ft)
Screw, active carbon filter (EXC-
F US, XCF
‑
W)
- 5 Nm (3.7 lbf ft)
Screw, air filter box cover EJOT PT ® K60x20-Z 3 Nm (2.2 lbf ft)
Screw, combination switch
(EXC
‑
F WESS EU, All Six Days
models)
EJOT PT
® K50x18 T20 2 Nm (1.5 lbf ft)
Screw, intake air temperature sen-
sor (All EU/BR/CN models) EJOT DELTA PT ® 45x12
‑
Z 0.7 Nm (0.52 lbf ft)
Screw, pressure regulator
EJOT PT ®
K60x25
‑
Z 2.3 Nm (1.7 lbf ft)
Screw, seat fixing EJOT EJOFORM PT ® K60x23/18 2.5 Nm (1.84 lbf ft)
Screw, emergency OFF switch M4 1 Nm (0.7 lbf ft)
Screw, fixed grip M4 5 Nm (3.7 lbf ft)
Loctite ® 243™
Spoke nipple, front wheel M4.5 6 Nm (4.4 lbf ft)
Spoke nipple, rear wheel M4.5 6 Nm (4.4 lbf ft)
Remaining nuts, chassis M5 5 Nm (3.7 lbf ft)
Remaining screws, chassis M5 5 Nm (3.7 lbf ft)
Screw, battery terminal M5 2.5 Nm (1.84 lbf ft)
Screw, intake air temperature sen-
sor (EXC-F US, XCF
‑
W)
M5 2.7 Nm (1.99 lbf ft)
Screw, light switch M5 1 Nm (0.7 lbf ft)
Screw, spoiler on fuel tank (EXC-
F US, XCF
‑
W)
M5x12 2 Nm (1.5 lbf ft)
Screw, turn signal switch M5 1 Nm (0.7 lbf ft)
Nut, starter motor M6 4 Nm (3 lbf ft)
Remaining nuts, chassis M6 10 Nm (7.4 lbf ft)
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Screw, ball joint of push rod on
foot brake cylinder M6 10 Nm (7.4 lbf ft)
Loctite ® 243™
Screw, chain sliding guard M6 10 Nm (7.4 lbf ft)
Loctite ® 243™
Screw, front brake disc M6 14 Nm (10.3 lbf ft)
Loctite
®
243™
Screw, rear brake disc M6 14 Nm (10.3 lbf ft)
Loctite ® 243™
Screw, throttle grip M6 5 Nm (3.7 lbf ft)
Fuel connection on fuel pump M8 15 Nm (11.1 lbf ft)
Nut, foot brake lever stop M8 20 Nm (14.8 lbf ft)
Nut, rear sprocket screw M8 35 Nm (25.8 lbf ft)
Loctite ® 2701™
Nut, rim lock M8 12 Nm (8.9 lbf ft)
Remaining nuts, chassis M8 25 Nm (18.4 lbf ft)
Remaining screws, chassis M8 25 Nm (18.4 lbf ft)