KTM F8203U2, Setup Instructions

Page: 15 / 49

SETUP 2
13
S03673-01
–
Insert the black and violet cables of bulb included in the
separate enclosure into the socket and position it in the
turn signal indicator lamp.
V01862-10
–
Position the turn signal on the headlight mask on both
sides, mount nuts with washers and tighten.
–
Join plug-in connector
6
of the left turn signal using the
violet and brown cable colors of the turn signal cable har-
ness.
Info
Pay attention to where the brake line is routed when
doing so.
–
Join plug-in connector
7
of the right turn signal using
the black and brown cable colors of the turn signal cable
harness.
–
Join plug-in connector
8
of the headlight.
–
Connect plug-in connector
9
of the turn signal switch.
–
Secure turn signal relay
bk
with a cable tie and plug in
the connector.
–
Install the headlight mask with the headlight. ( p. 21)
–
Remove the air filter box cover. ( p. 35)
–
Remove the rear left side cover. ( p. 36)
V01863-10
–
Disconnect tail light plug-in connector
bl
on the wiring
harness.