10/REAR WHEEL
77
301797-10
–
Loosen the screws
by four turns.
Alternative 1
–
Insert the tool
from the tool set into the hole
of the rear wheel eccentric
element.
Alternative 2
–
Position the special tool at the rear wheel eccentric element.
Hook wrench (83019011000) (
–
To adjust the chain tension
, slowly turn at the rear wheel or the special tool to
rotate the rear wheel eccentric element forward or backward.
Guideline
Chain tension
140… 145 mm (5.51… 5.71 in)
Info
Rotating the rear wheel eccentric element forward increases chain tension.
Rotating the rear wheel eccentric element backward reduces chain tension.
The rear wheel eccentric element should always be positioned such that the
grease nipple
is visible. This ensures that the vehicle has the greatest
ground clearance.
–
Fully tighten screws
.
Guideline
Screw, rear wheel eccentric element
M8
20 Nm
(14.8 lbf ft)
–
Remove the tool
.
14.7
Adjusting the toe width of rear axle
Warning
Danger of accidents
Modifications to the suspension settings can seriously alter the vehicle's ride behavior.
–
Following modifications, ride slowly at first to get the feel of the new ride behavior.
–
Engage 1st gear.
301538-10
–
Loosen nuts
of the wheel hubs on both sides.
–
Jack up the vehicle. (
–
Remove the nuts
on both sides and take all parts off of the rear axle.
0
0
3
3
0
0
1
1
0
0
2
2
100103-10
Setting a narrow toe width:
–
Mount the wheel hub
.
–
Mount the conical ring
with the cone facing outward.
–
Mount the spacer
with the cone facing inward.
–
Mount the washer and the new self-locking nut.
PartShark.com
877-999-5686
