KTM 1290 SUPER ADVENTURE R 2018 Owner'S Manual Download Page 83

Page: 83 / 360

COMBINATION INSTRUMENT 7

–

Press the

DOWN

button until

Audio

is marked. Press

the

SET

button to open the menu.

–

Press and hold the

button to increase the audio volume.

–

Press and hold the

DOWN

button to reduce the audio volume.

–

Press the

button briefly to change to the next audio track.

–

Briefly pressing the

DOWN

button twice changes to the previ-

ous audio title or plays the current audio title, depending on
the cellphone model.

–

Press the

SET

button to play or pause the audio track.

Tip

With some cellphones, the audio player needs to be
started before playback is possible.
The

Audio

function can be added to

Quick Selector 1

Quick Selector 2

for easier operation.

Summary of Contents for 1290 SUPER ADVENTURE R 2018









































































































































































































































































































































































Search results

Summary of Contents for 1290 SUPER ADVENTURE R 2018

Reviews:

KTM 1290 SUPER ADVENTURE R 2018, Owner'S Manual, Page: 83 / 360

Search results

Summary of Contents for 1290 SUPER ADVENTURE R 2018

Reviews: