KTM 1290 SUPER ADVENTURE R 2018 Owner'S Manual Download Page 216

Page: 216 / 360

13 SERVICE WORK ON THE CHASSIS

214

Warning

Danger of accidents

Oil or grease on the brake

discs reduces the braking effect.

–

Always keep the brake discs free of oil and
grease.

–

Clean the brake discs with brake cleaner when
necessary.

–

Clean and oil the dust boots and inner fork tubes of both
fork legs.

Universal oil spray (

p. 343)

–

Press dust boots

back into their installation position.

–

Remove excess oil.

Finishing work

–

Install front fender. (

p. 211)

–

Remove the vehicle from the center stand. (

p. 186)

13.21

Removing the tank cover

Preparatory work

–

Remove the seat. (

p. 187)

–

Remove the front side cover. (

p. 201)

Summary of Contents for 1290 SUPER ADVENTURE R 2018









































































































































































































































































































































































Search results

Summary of Contents for 1290 SUPER ADVENTURE R 2018

Reviews:

KTM 1290 SUPER ADVENTURE R 2018, Owner'S Manual, Page: 216 / 360

Search results

Summary of Contents for 1290 SUPER ADVENTURE R 2018

Reviews: