KTM 1290 SUPER ADVENTURE R 2018 Owner'S Manual Download | Manualshive

Page: 235 / 360

background image

BRAKE SYSTEM 14

233

14.5

Checking the front brake linings

Warning

Danger of accidents

Worn-out brake linings reduce the braking effect.

–

Ensure that worn-out brake linings are replaced immediately. (Your authorized KTM workshop will be
glad to help.)

Warning

Danger of accidents

Damaged brake discs reduce the braking effect.

If the brake linings are not changed in time, the brake lining carriers grind against the brake disc. As a
consequence, the braking effect is greatly reduced and the brake discs are destroyed.

–

Check the brake linings regularly.

S00957-10

–

Check all brake linings on both brake calipers to ensure they
have minimum thickness

A

.

Minimum thickness

A

≥

1 mm (

≥

0.04 in)

» If the minimum thickness is less than specified:

–

Change the front brake linings.

–

Check all brake linings on both brake calipers for damage and
cracking.
» If there is wear or tearing:

–

Change the front brake linings.

«
...
233
234
235
236
237
...
»

Summary of Contents for 1290 SUPER ADVENTURE R 2018









































































































































































































































































































































































Reviews:

No comments

Related manuals for 1290 SUPER ADVENTURE R 2018

Brand: Thunderbike Pages: 11

Monarch Pass M321

Brand: Wolfman Pages: 5

1999 Shadow Aero VT1100C3

Brand: Honda Pages: 226

Brand: Suzuki Pages: 165

Brand: Yoshimura Pages: 4

Brand: Honda Pages: 330

Brand: LSL Pages: 4

BRUTALE 750 ORO

Brand: MV Agusta Pages: 386

Brand: Shark Pages: 16

Brand: Surtek Pages: 12

Brand: hepco & becker Pages: 4

Brand: hepco & becker Pages: 4

Brand: hepco & becker Pages: 7

Brand: hepco & becker Pages: 2

Brand: hepco & becker Pages: 4

Brand: hepco & becker Pages: 3

Brand: hepco & becker Pages: 4

Brand: hepco & becker Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands