KTM 1290 SUPER ADVENTURE R 2018 Owner'S Manual Download Page 185

Page: 185 / 360

SUSPENSION SETTING 12

183

12.8

Adjusting the rebound damping of the shock absorber

Caution

Risk of injury

Parts of the shock absorber will move around if the shock absorber is detached incorrectly.

The shock absorber is filled with highly compressed nitrogen.

–

Please follow the description provided. (Your authorized KTM workshop will be glad to help.)

K00817-10

–

Turn adjusting screw

clockwise up to the last perceptible

click.

–

Turn counterclockwise by the number of clicks corresponding
to the shock absorber type.
Guideline

Rebound damping

Comfort

20 clicks

Standard

15 clicks

Sport

10 clicks

Full payload

10 clicks

Info

Turn clockwise to increase damping; turn counterclock-
wise to reduce damping.

Summary of Contents for 1290 SUPER ADVENTURE R 2018









































































































































































































































































































































































Search results

Summary of Contents for 1290 SUPER ADVENTURE R 2018

Reviews:

KTM 1290 SUPER ADVENTURE R 2018, Owner'S Manual, Page: 185 / 360

Search results

Summary of Contents for 1290 SUPER ADVENTURE R 2018

Reviews: