KTM 1290 SUPER ADVENTURE R 2018 Owner'S Manual Download Page 291

Page: 291 / 360

SERVICE WORK ON THE ENGINE 19

289

19.1

Checking the engine oil level

Info

Oil consumption depends on the riding style and the operating conditions.

Condition

The engine is at operating temperature.

Preparatory work

–

Stand the motorcycle upright on a horizontal surface.

401696-11

Main work

–

Check the engine oil level in the engine oil level viewer.

Info

After switching off the engine, wait one minute before
checking the level.

The engine oil level should be in the upper part of the range

of the engine oil level viewer.

» When the engine oil level is in area

of the engine oil

level viewer:

–

Do not add engine oil.

» When the engine oil level is in area

of the engine oil

level viewer:

–

Engine oil can be added.

Summary of Contents for 1290 SUPER ADVENTURE R 2018









































































































































































































































































































































































Search results

Summary of Contents for 1290 SUPER ADVENTURE R 2018

Reviews:

KTM 1290 SUPER ADVENTURE R 2018, Owner'S Manual, Page: 291 / 360

Search results

Summary of Contents for 1290 SUPER ADVENTURE R 2018

Reviews: