KTM 1290 SUPER ADVENTURE R 2018 Owner'S Manual Download Page 50

Page: 50 / 360

6 CONTROLS

6.21

Fuel cocks

S02261-10

A fuel cock

is located on each side of the fuel tank.

Info

The fuel cocks must always be open during operation.
The fuel cocks are only closed to remove the fuel tank.

Possible states

• Fuel cocks are closed

–

Level equalization cannot take place

and the fuel supply to the throttle valve body is shut off.

• Fuel cocks are open

–

Level equalization can take place and

the fuel supply to the throttle valve body is open.

6.22

Opening storage compartment

F00918-10

–

Lift the lock

and detach in area

–

Open storage compartment.

Info

A USB socket

(

p. 45) is located in the storage

compartment for supplying power to external devices.

Summary of Contents for 1290 SUPER ADVENTURE R 2018









































































































































































































































































































































































Search results

Summary of Contents for 1290 SUPER ADVENTURE R 2018

Reviews:

KTM 1290 SUPER ADVENTURE R 2018, Owner'S Manual, Page: 50 / 360

Search results

Summary of Contents for 1290 SUPER ADVENTURE R 2018

Reviews: