KTM 1190 RC8 AUS, Owner'S Manual, Page: 72 / 250

CONTROLS
70
Info
RPM2 is the engine speed above which the shift warning light lights up con-
stantly. If RPM1 = RPM2 , the shift warning light lights up constantly when you
reach the engine speed set.
–
Set the engine speed with the button or the button .
–
Press the MODE button briefly.
The settings are stored and the display changes to the SETTING menu.
Info
At delivery, RPM1 is set to 10000 and RPM2 to 10500.
–
Press the button briefly and repeatedly until the symbol shows BACK... in the info
display.
–
Press the MODE button briefly.
–
Press the button briefly and repeatedly until the symbol shows EXIT SETUP in the
info display.
–
Press the MODE button briefly.
5.50
Setting the blank time of the LAP button LAP BLANK T
Condition
The ignition is on.
The motorcycle is stationary.