KTM 1190 RC8 AUS, Owner'S Manual, Page: 179 / 250

MAINTENANCE WORK ON FRAME AND ENGINE
177
programmed during the activation procedure are invalid, but can be reprogrammed in a
further activation procedure.
–
Press the emergency OFF switch into the position .
–
Insert the orange programming key in the ignition lock.
–
Switch on the ignition by turning the orange programming key to the ON position .
EFI warning lamp ( MIL ) lights up, switches off, and then starts to flash.
The immobilizer indicator lamp lights up.
–
Switch off the ignition by turning the orange programming key to the OFF position .
–
Pull out the orange programming key.
–
Insert the black ignition key in the ignition lock.
–
Switch on the ignition by turning the black programming key to the position ON .
EFI warning lamp ( MIL ) lights up, switches off, and then starts to flash.
The immobilizer indicator lamp lights up, switches off briefly, and switches
on again.
–
Switch off the ignition by turning the black programming key to the position OFF .
–
Remove the black ignition key.
–
To activate further ignition keys, repeat the last 4 steps with the respective ignition
key.
–
Insert the orange programming key in the ignition lock.
–
Switch on the ignition by turning the orange programming key to the ON position .
EFI warning lamp ( MIL ) lights up, switches off, and then starts to flash.
The immobilizer indicator lamp lights up, switches off briefly, and flashes
according to the number of functioning black ignition keys including the orange
programming key.
–
Switch off the ignition by turning the orange programming key to the OFF position .
–
Pull out the orange programming key.