KTM 1190 RC8 AUS, Owner'S Manual, Page: 182 / 250

MAINTENANCE WORK ON FRAME AND ENGINE
180
9.67
Filling the cooling system compensating tank
Warning
Danger of scalding During motorcycle operation, the coolant gets very hot and is under pressure.
–
Do not remove the radiator cap, radiator hoses or other cooling system components when the engine is hot. Allow the engine
and cooling system to cool down. In case of scalding, rinse immediately with lukewarm water.
Warning
Danger of poisoning Coolant is poisonous and a health hazard.
–
Avoid contact between coolant and skin, eyes and clothing. If it gets into your eyes, rinse immediately with water and contact
a doctor. Wash affected skin areas immediately with soap and water. If coolant is swallowed, contact a doctor immediately.
Change clothes that have come into contact with coolants. Keep coolant out of the reach of children.
Note
Engine damage Impaired cooling efficiency due to air trapped in the cooling system.
–
After draining coolant and refilling the cooling system, the motorcycle must be raised at the front according to the model type. This is
the only way of ensuring that the cooling system is filled without air bubbles. (Your authorized KTM RC8 workshop will be pleased to
help.)
100750-10
–
Check the coolant level. ( p. 179)
–
Remove the cap

of the compensating tank.
–
Top up with coolant until the specified coolant level is reached.
Guideline
The coolant level must be between MIN and MAX .
Alternative 1
Coolant ( p. 235)