MAINTENANCE WORK ON FRAME AND ENGINE
193
100763-11
Setting a lower seat position:
–
Remove screw
with washer on the left and right sides of the vehicle.
–
Push the rear end down until the drill holes of the frame are level with the upper
rear drill holes of the rear.
–
Mount the screw and washer on the left and right sides of the vehicle, but do not
tighten.
100765-11
–
Remove screw
with washer on the left and right sides of the vehicle.
–
Push the rear end up until the drill holes of the frame are level with the upper front
drill holes of the rear.
100764-01
–
Mount the screw and washer on the left and right sides of the vehicle, and tighten.
Guideline
Screw, subframe
M8
20 Nm
(14.8 lbf ft)
Loctite
®
243™
Summary of Contents for 1190 RC8 AUS
