KTM 1190 ADVENTURE R Page 50 Owner'S Manual Download

Page: 50 / 229

COMBINATION INSTRUMENT

7.1

Overview

401800-10

Matrix display (

p. 49)

Tachometer

Shift warning light (

p. 52)

Segment display

Indicator lamps (

p. 50)

7.2

Activation and test

401801-01

Activation

The combination instrument is activated when the ignition is switched on.

Info

The brightness of the displays is controlled by a brightness sensor in the combina-
tion instrument.

Test

The segment display, the indicator lamps, and the tachometer are briefly activated for a
function test.
The welcome text and information on the next service (

p. 53) appear on the matrix dis-

play.

Info

If the battery was disconnected, the time and date must be set.

Summary of Contents for 1190 ADVENTURE R






































































































































































































































Search results

Summary of Contents for 1190 ADVENTURE R

Reviews:

Related manuals for 1190 ADVENTURE R

Brands by name

Popular brands

KTM 1190 ADVENTURE R, Owner'S Manual

Search results

Summary of Contents for 1190 ADVENTURE R

Reviews:

Related manuals for 1190 ADVENTURE R

Brands by name

Popular brands