KTM 1190 ADVENTURE R Page 12 Owner'S Manual Download

Page: 12 / 229

SAFETY ADVICE

2.3

Degrees of risk and symbols

Danger

Identifies a danger that will immediately and invariably lead to fatal or serious permanent injury if the appropriate measures are not
taken.

Warning

Identifies a danger that is likely to lead to fatal or serious injury if the appropriate measures are not taken.

Caution

Identifies a danger that may lead to minor injuries if the appropriate measures are not taken.

Note

Identifies a danger that will lead to considerable machine and material damage if the appropriate measures are not taken.

Warning

Identifies a danger that will lead to environmental damage if the appropriate measures are not taken.

Summary of Contents for 1190 ADVENTURE R






































































































































































































































Search results

Summary of Contents for 1190 ADVENTURE R

Reviews:

Related manuals for 1190 ADVENTURE R

Brands by name

Popular brands

KTM 1190 ADVENTURE R, Owner'S Manual

Search results

Summary of Contents for 1190 ADVENTURE R

Reviews:

Related manuals for 1190 ADVENTURE R

Brands by name

Popular brands