KTM 1190 ADVENTURE R, Owner'S Manual

Page: 171 / 229

16 ELECTRICAL SYSTEM
169
S00298-10
–
Plug connector
2
into the new headlight bulb.
Low beam (H11/socket PGJ19-2) ( p. 207)
–
Position headlight bulb
1
into the bulb socket and turn it all the way clockwise.
The headlight bulb is locked into the bulb socket.
Finishing work
–
Refit the headlight mask with the headlight. ( p. 167)
–
Install the wind shield. ( p. 130)
–
Install the mask spoiler. x ( p. 123)
–
Install the tank cover. ( p. 128)
–
Install the front side cover. ( p. 119)
–
Mount the seat. ( p. 107)
–
Check the headlight setting. ( p. 172)
16.10 Changing the high beam bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
Preparatory work
–
Switch off all power consumers and switch off the engine.