KTM 1190 ADVENTURE R, Owner'S Manual

Page: 173 / 229

16 ELECTRICAL SYSTEM
171
–
Install the mask spoiler. x ( p. 123)
–
Install the tank cover. ( p. 128)
–
Install the front side cover. ( p. 119)
–
Mount the seat. ( p. 107)
–
Check the headlight setting. ( p. 172)
16.11 Changing the turn signal bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
B01860-10
–
Remove the screw on the front of the turn signal housing.
–
Carefully remove diffuser
1
.
–
Press bulb 2 carefully into the socket, turn it counterclockwise by about 30°, and pull
it out of the socket.
Info
Do not touch the reflector with your fingers, and keep it free from grease.
–
Press the new bulb carefully into the socket and turn it clockwise until it stops.
Turn signal (RY10W / socket BAU15s) ( p. 207)
–
Check the turn signal to make sure it is functioning properly.
–
Position the diffuser.