KTM 1190 ADVENTURE R, Owner'S Manual

Page: 200 / 229

22 TROUBLESHOOTING
198
Faults Possible cause Action
Combination instrument shows nothing
on the display Fuse 1 blown
–
Change the fuses in the fuse box. ( p. 164)
Main fuse burned out
–
Change the main fuse. ( p. 162)
Battery discharged
–
Recharge the battery. x ( p. 158)
–
Check the quiescent current. x
Ignition/steering lock is faulty
–
Check the ignition/steering lock. x
Engine does not crank when the elec-
tric starter button is pressed Emergency OFF switch is off
–
Press the emergency OFF switch to the posi-
tion
ON .
Operating error
–
Carry out the start procedure. ( p. 82)
Battery discharged
–
Recharge the battery. x ( p. 158)
–
Check the quiescent current. x
Safety start system is faulty
–
Read out the fault memory using the KTM diag-
nostics tool.
x
ICU is not enabled
–
Activate the ICU.
x
CAN bus communication error
–
Read out the fault memory using the KTM diag-
nostics tool.
x
Fault in EFI control unit.
–
Read out the fault memory using the KTM diag-
nostics tool.
x
Fault in MCU control unit.
–
Read out the fault memory using the KTM diag-
nostics tool.
x
Engine turns only if the clutch lever is
drawn The vehicle is in gear
–
Shift the transmission to idle .
Safety start system is faulty
–
Read out the fault memory using the KTM diag-
nostics tool.
x
Engine turns although a gear is
engaged Safety start system is faulty
–
Read out the fault memory using the KTM diag-
nostics tool.
x