-84-
Bandwidth Control
The bandwidth control settings are used to place a ceiling on the transmitting and receiving data rates
for any selected port.
Bandwidth Settings window
The following parameters can be set or are displayed:
Unit
Allows you to specify a Switch. Specify the number 15.
From/To
A consecutive group of ports may be configured starting with the selected port.
Type
This drop-down menu allows you to select between RX (receive,) TX (transmit,) and
Both. This setting will determine whether the bandwidth ceiling is applied to receiving,
transmitting, or both receiving and transmitting packets.
no_limit
This drop-down menu allows you to specify that the selected port will have no band-
width limit. Enabled disables the limit.
Rate
This field allows you to enter the data rate, in kb/s, that will be the limit for the selected
port.
