-192-
Select the desired Switch using the Unit drop-down menu and the desired port using the Port drop-
down menu. The Time Interval field sets the interval at which the error statistics are updated.
The following fields can be set or are displayed:
Unit
Specify number 15 indicates the Switch.
Port
Allows you to specify a port to monitor - from the Switch selected above.
Clear
Clicking this button clears all statistics counters on this window.
View Table
Clicking this button instructs the Switch to display a table rather than a line graph.
View Line Chart
Clicking this button instructs the Switch to display a line graph rather than a table.
Bytes
Counts the number of bytes successfully sent from the port.
Packets
Counts the number of packets successfully sent on the port.
Time Interval <1s>
The time between updates received from the Switch, in seconds. The
default is 1s.
Record Number <200>
Select number of times the Switch will be polled between 20 and 200. The
default value is 200.
Show/Hide
Check whether to display Bytes and Packets.
Errors
Various statistics including Received Errors and Transmitted Errors can be viewed as either a line
graph or a table.
