-38-
configure IGMP Snooping for individual VLANs, use the IGMP Snooping window in the IGMP folder.
Multicast router Only
If this option is enabled and IGMP Snooping is also enabled, the Switch forwards all multicast traffic to
a multicast-enabled router only. Otherwise, the Switch will forward all multicast traffic to any IP
router.
Telnet Status
Telnet configuration is Enabled by default. If you do not want to allow configuration of the system
through Telnet choose Disabled.
Telnet TCP Port Number(1-65535)
The Telnet TCP port number. TCP ports are numbered between 1 and 65535. The well-known TCP
port for the Telnet protocol is 23.
Web Status
Web-based management is Enabled by default. If you choose to disable this by selecting Disabled, you
will lose the ability to configure the system through the web interface as soon as these settings are
applied.
Web TCP Port Number(1-65535)
The TCP port number currently being utilized by the Switch to connect to the web interface. The well-
known TCP port for the Web interface is 80.
RMON Status
Remote monitoring (RMON) of the Switch is Enabled or Disabled here.
GVRP
Use this pull-down menu to enable or disable GVRP on the Switch.
Link Aggregation Algorithm
The algorithm that the Switch uses to balance the load across the ports that make up the port trunk
group is defined by this definition. Choose MAC Source, MAC Destination, MAC Src & Dest, IP
Source, IP Destination, and IP Src & Dest. (See Link Aggregation)
Switch 802.1x
Use this pull-down menu to enable or disable 802.1x functions on the Switch.
Syslog state
Use this pull-down menu to enable or disable Syslog.
