background image

 

MK60SP 12/10/20                                        KEENAN FILTERS® by KTI Systems, Inc.                                          www.keenanfilters.com 

PAGE  18 

LIMITED WARRANTY 

 
Thank you for purchasing a product from KTI Systems, Inc. of Southwick, Massachusetts. 

 All products manufactured by KTI are subject to the following Limited Warranty.  

 Limited Warranty.  KTI warrants and guarantees only to the original purchaser that the product is free 
from defects of materials and workmanship in the manufacturing process for the period of one year from 
the date of purchase of a new KTI product.  

 This  Warranty  does  not  apply  to  special  order  items  and  this  Warranty  does  not  apply  to  renovated,    
retrofit  or  modified  products,  whether  or  not  they  originated  with  KTI  and  whether  or  not  they  were     
retrofit by the original owner.  

 This Warranty does not apply to products installed in watercraft for racing or competition. 

This Warranty shall be inapplicable to any product not properly installed and not properly used by the 
purchaser or to any product damaged or impaired by external forces.   

  This Warranty does not cover any product for which applicable proof of purchase date, installation date 
and watercraft mileage at the time of installation is not presented.  

 This  Warranty  does  not  cover  any  issues  that  are  considered  normal  maintenance  and  which  are       
customarily replaced, cleaned or adjusted as normal owner maintenance, unless they are defective in 
material or factory workmanship.   

Process.  A product claimed to be defective must be returned to the place of purchase.  KTI at its sole 
option  shall  replace  the  defective  product  with  a  comparable  new  product  or  repair  the  defective     
product in the event that it qualifies under this Warranty.  

LIMITATION OF LIABILITY  

To  the  extent that  this  Warranty  is  available on  this  product,  KTI  shall have no  liability whatsoever for  
incidental  or  consequential  damages  flowing  from  the  use  of  any  defect  product  or  by  reason  of  the    
failure  of  any  product.    KTI  specifically  disavows  all  express  or  implied  warranties  of  fitness  for  a           
particular purpose, warranties of description, and warranties of merchantability.   

Product  Warning.    This  product  and  its  use  may  be  considered  inherently  dangerous.    Failure  of  the 
product,  improper  selection  of  the  product  or  improper  use  of  the  product  or  related  products  may 
cause death, personal injury and property damage.  KTI disclaims any responsibility for any such injury 
or damage. 

Indemnity.    You  agree  to  indemnify  and  hold  KTI,  its  officers,  directors,  employees,  agents,  harmless 
from any and all claims, demands, lawsuits, liabilities and expenses arising out of or in connection with 
your use of the product and your breach or violation of any of the Terms of this Limited Warranty.   

Legal Disclosure. 

The product is protected by United States Patents. “KEENAN FILTERS” is a registered 

trademark of KTI Systems, Inc.  The materials presented herewith, including this Limited Warranty, are 
protected by the Copyright laws of the United States of America. You may not copy or reverse engineer 
our product. Your use of this product indicates that you have read this Limited Warranty and the Legal 
Disclosure and agree to comply herewith.   

© 2017  KTI Systems, Inc. 

All rights reserved. 

Summary of Contents for Keenan MK60SP






















Reviews: