CONFIDENTIAL - This document is the property of K.T.C. S.r.l. and cannot be reproduced or issued to third parties without written
authorization. K.T.C. S.r.l. shall safeguard its rights to the full extent of the law.
OPERATION AND INSTALLATION MANUAL
COD. 091114 – COMPACK 2 ECO / SPECIAL - REV. 08 - DATE 10/2020
page
52
of
63
10.4
CHANGING THE OIL
Change the oil as indicated in the table on chap 10.6. Extending the number of hours before
replacement depends on the type of oil used but in no case can oil be used for more than one year
.
If the compressor is not used frequently (a couple of hours a day), we recommend changing the oil
every 6 months and periodically opening the oil drain ball valve to check for condensation residues.
When the oil drain ball valve is opened, oil starts flowing out of the screw assembly.
Always keep on all necessary equipment to collect the oil.
Open filling cap.
Open emptying cap.
ADAM 50
ADAM 60
Emptying cap
Filling cap
Emptying cap
Filling cap
