CONFIDENTIAL - This document is the property of K.T.C. S.r.l. and cannot be reproduced or issued to third parties without written
authorization. K.T.C. S.r.l. shall safeguard its rights to the full extent of the law.
OPERATION AND INSTALLATION MANUAL
COD. 091114 – COMPACK 2 ECO / SPECIAL - REV. 08 - DATE 10/2020
page
11
of
63
8.
Personnel Intervention
Before performing any form of intervention, the personnel must be aware of all compressor
functions and controls.
9.
Compressor Usage
Never use the compressor for any purpose other than those specified in the user's manual.
10.
Air Jets
Never direct air jet toward persons or animals.
11.
Hot Parts
To prevent burns, never touch the hoses, motor or other hot parts.
12.
Work Area
Keep the compressor work area clean and well ventilated. Never use the compressor in a place
containing paints, solvents or combustible/explosive materials.
13.
Compressor Maintenance
Check the outside of the compressor. If the power supply cord is damaged, repair or replace it. If
necessary, contact an Authorized Service Centre.
14.
Check for Defective Parts and Air Leaks
Check alignment of moving parts, hoses, pressure gauges, pressure reducers, pneumatic connections
or other parts important to compressor function. Make certain that all screws, bolts and lids are
thoroughly secured. Any damaged parts must be repaired by an Authorized Service Centre.
15.
Protect yourself against Thermal Shocks
Prevent accidentally coming into contact with metal parts of the compressor such as hoses, tanks or
grounded parts. Never use the compressor if water or moisture is present in the area.
16.
Disconnect the Compressor
When servicing the compressor or when it is not running, always disconnect it from the power
supply and completely vent the pressure in the tank.
17.
Handling
Never move the compressor while it is connected to the power supply or when the tank is
pressurized. Before unplugging the compressor make certain that the switch is set to OFF.
18.
Precautions for the Power Supply Cord
Never unplug the unit by pulling on the cord. Never step on or crush the power supply cord.
Keep it away from heat, oil or sharp surfaces. Never turn off the compressor by pulling on the
power supply cord. Use the red emergency button to stop the compressor.
19.
Electrical Extension Cords
If the compressor is used outdoor, use power supply cords rated for outdoor use.
20.
Cleaning of the Intake Grid and Plastic Parts
Keep the ventilation grid clean. If the unit is used in a particularly dirty environment, clean the grid
regularly. Never use solvents, thinners or other substances containing hydrocarbons as they can
damage the plastic parts. Clean with soapy water or an appropriate liquid cleaner.
