9
3.
Installation
3.1
Unpacking and inspection
1. Unpacking the UPS and check that whether it’s damaged during
the transportation. If damaged or some parts missing, don’t
start the machine and inform the carrier and franchiser.
2. Check the annex (please consult Appendix Table 2).
3. Check if the UPS is just what you wanted to purchase. You can
affirm through inspecting the model number on rear panel of
the UPS.
3.2
Installation note
Put the UPS at flat place next to the equipment.
Keep UPS at least 20cm from wall or equipment or other object.
Don’t block the ventilation holes of the UPS front panel and bottom
part, so as to keep the ventilation in good conditions, avoid
temperature of components inside getting high.
Keep the UPS away from high temperature, water, flammable gas,
corrosive gas, dust, direct sunlight; explosive things don’t lay the
UPS outdoor
Install a double-pole joined actuator with more than 40A/63A
（
6KVA/10KVA) at the input L-N, in order to cut off the power
when in emergency situation.
PDU is required to connect to the UPS output so as to weaken the
affection between loads.
In order to fix the UPS, please lock its wheels by shifting the sheet
on each wheel.
RCD load like computer, linear load and small inductive load can
be connected to the UPS. Please contact dealer if other types of
loads are required to connect.
For the sake of user and equipments, please be sure to take
correct power configuration.
