15
Warning:
★
Before installing battery, make sure that the UPS and breaker are all
turned off. Remove all your metallic adornment such as finger ring,
watch, and so on before connecting battery.
★
No anti-connection or short circuit between the battery anode and
cathode forever. Red cable connect with battery anode “+” and black
cable connect with cathode “-”.
★
Please use the screwdriver with insulating handle. Do not lay the tools
or metallic goods on the battery.
Notice:
★
When using the external battery, It is best to use external battery
cable which matches with the equipment.
★
When connecting load to UPS, first turn off load and then connect the
power cable and finally turn on load one-by-one.
★
Inductance loads such as motor, fluorescent lamp, photocopier are
strictly prohibited connecting to UPS to avoid damage.
★
Plug UPS on the special socket with over-current protection, the
power socket that used should be connected with ground wire.
★
UPS is likely to have output voltage no matter whether the power input
cable is plugged in mains input socket. If you wish UPS have no
output, first break off the switch and then cancel the mains.
★
When connect laser printer, select the capacity of UPS according to
the UPS start power because the startup power is higher.
