12
3.4
Connection of the UPS communication cables
1
）
RS-232 cable provided in accessories can be used to connect
the UPS with PC
2
）
Follow steps below to install SNMP (if purchased ):
A. Remove the cover of SNMP slot at UPS rear panel and
keep it for further use.
B. Insert the SNMP card and tighten the screws
C. Connect the UPS with internet by network cable.
D. Refer to the SNMP manual provided to do SNMP setting.
3.5
Parallel Card (Optional)
Parallel installation steps as below:
1)
Loosen the screws in the parallel card slot and remove the
cover
，
please keep the cover for future use.
2)
Insert the parallel card into the slot and tighten the screws.
3)
Connect the UPS with parallel cables.
