32
SMARTRONIC MA
VII - 5 - 4 Safety position by lack of power
Warning :
This parameter is factory set and must correspond to the equipment configuration of the non-
functional product.
The values "1 - UNDEF" "3-CLOSE" and "OPEN-4" are interchangeable from a functional point of view.
They are used for the boxes with the following references:
- R131 * / **** 1 *** B *
B
2 * 0600
- R131 * / **** 1 *** B *
A
2 * 0600
The value "2-STOP corresponds to a particular type of distributor. It is used for the case with the following reference:
- R131* / ****1***B*
C
2*0600
Accès à ce paramètre :
VII - 5 - 5 Configuring the main screen display
The text display direction can be reversed to make it easier to read, depending on how the positioner is
mounted.
This is carried out via the ”LCD DIR” submenu.
Access to these settings:
VII - 5 - 6 Product diagnosis
The SMARTRONIC MA positioner can display the number of opening/closing cycles carried out since the last
Reset (”NB of OP” parameter ranging from 0 to 3 999 999 999 opening/closing cycles), the run time since the
last Reset (”RUN TIME” parameter ranging from 0day- 0hour- 0minute to 3650days- 0hour- 0minute) and can
be used to reset these parameters (RESET INFO). When one of the maxima is reached, both parameters are
reset in order to keep consistent values for diagnosis purposes. This information can be accessed via the
”DIAGNOSIS” menu.
Access to these parameters:
