4
Transport/Temporary Storage/Disposal
4.1
As-delivered condition
NOTE
Prior to dispatch, the pressure booster system was tested and inspected to ensure full
compliance with the specifications and should therefore be in perfect electrical and
mechanical condition upon arrival at its destination.
It is recommended that the pressure booster system be inspected for in-transit damage
immediately upon receipt. If there are any complaints or objections, the recipient and
carrier must jointly draw up a damage report.
4.2
Transport
NOTE
The pressure booster system is bolted to a pallet and wrapped in plastic foil for shipping
and temporary storage. All connecting points are capped.
DANGER
Pressure booster system tipping over
Risk of injury by falling pressure booster system!
▷
Never suspend the pressure booster system by its power cable.
▷
Observe the local accident prevention regulations.
▷
Use suitable, approved transport equipment, e.g. crane, forklift or pallet trucks.
▷
Attach the pressure booster system to crane lifting tackle as shown, or use a
forklift or pallet truck to move the pallet.
Fig. 1: Transporting the pressure booster system
✓
The pressure booster system has been checked for in-transit damage.
1. Make sure the transport equipment is suitable for safely carrying the indicated
load.
2. Transport the pressure booster system to the place of installation.
3. Attach the pressure booster system to the lifting tackle as shown, lift it off the
pallet and dispose of the pallet.
4. Use suitable lifting equipment to lift the pressure booster system and carefully
put it down at the place of installation.
4.3
Storage/Preservation
If commissioning is to take place some time after delivery, we recommend that the
following measures be taken when storing the pressure booster system:
4 Transport/Temporary Storage/Disposal
Hya®-Solo DV
11 of 56
