2 Safety
9 of 64
Hya-Rain/Hya-Rain N
2.3 Personnel qualification and training
All personnel involved must be fully qualified to install, operate, maintain and
inspect the equipment this manual refers to.
The responsibilities, competence and supervision of all personnel involved in
transport, installation, operation, maintenance and inspection must be clearly
defined by the operator.
Deficits in knowledge must be rectified by means of training and instruction
provided by sufficiently trained specialist personnel. If required, the operator can
commission the manufacturer/supplier to train the personnel.
Training at the system must always be supervised by the technical specialist
personnel.
2.4 Consequences and risks caused by non-compliance with these operating
instructions
▪
Non-compliance with this operating manual will lead to forfeiture of warranty
cover and of any and all rights to claims for damages.
▪
Non-compliance can, for example, have the following consequences:
– Hazard to persons by electrical, thermal and mechanical effects
– Failure of important product functions
– Failure of prescribed maintenance and servicing practices
2.5 Safety awareness
In addition to the safety information contained in this operating manual and the
intended use, the following safety regulations shall be complied with:
▪
Accident prevention, health regulations and safety regulations
▪
Safety regulations for handling hazardous substances
▪
Applicable standards, directives and laws
2.6 Safety information for the operator/user
▪
Eliminate all electrical hazards. (In this respect refer to the applicable national
safety regulations and/or regulations issued by the local energy supply
companies.)
2.7 Safety information for maintenance, inspection and installation
▪
Modifications or alterations of the pump (set) are only permitted with the
manufacturer's prior consent.
▪
Use only original spare parts or parts/components authorised by the
manufacturer. The use of other parts/components can invalidate any liability of
the manufacturer for resulting damage.
▪
The operator ensures that maintenance, inspection and installation are
performed by authorised, qualified specialist personnel who are thoroughly
familiar with the manual.
▪
Only carry out work on the system during standstill, with the system de-energised
and secured against unintentional start-up.
▪
When taking the system out of service always adhere to the procedure described
in the manual.
▪
As soon as the work has been completed, re-install and re-activate any safety-
relevant devices and protective devices. Before returning the product to service,
observe all instructions on commissioning. (
▪
Make sure the system cannot be accessed by unauthorised persons (e.g. children).
2.8 Unauthorised modes of operation
Always observe the limits stated in the product literature.
