KSB Etaprime L, Installation & Operating Manual

Page: 69 / 76

9 Related Documents
69 of 76
Etaprime L
9.1.3 Etaprime G and C, flanged connection, with bearing bracket/oil lubrication
(SU 25 and SU 35)
Design of pump and mechanical seal as described in
(
ð
Section 9.1.2, Page 65)
.
Difference: oil-lubricated bearing bracket instead of grease-lubricated bearing
bracket.
Fig. 27:
Model with oil lubrication and constant level oiler
[Supplied in packaging units only
Table 33: List of components
21)
Part No. Description Part No. Description
183 Support foot 672 Vent
210 Shaft 731.21 Pipe union
330 Bearing bracket 901.01/.02/.04/.31 Hexagon head bolt
321.01/.02 Deep groove ball bearing 903.46 Screw plug
360.01/.02 Bearing cover 920.95 Hexagon nut
400.01/.02 Gasket 930.95 Spring washer
411.46 Joint ring 940.01/.02/.09
22)
Key
421.01/.02 Lip seal Connections:
507.01 Thrower 8B Leakage drain
550.95
23)
Disc 13B Oil drain
638 Constant level oiler 13D Oil filling and venting
21)
Some individual components might not be applicable, depending on the size and shaft material.
22)
For shaft units 55 and 60 only
23)
For shaft unit 25 only